As the name suggests, CNC Wood Router is a machine tool controlled by CNC system. Among the common faults of CNC machine tools, mechanical faults often have obvious characteristics.
The positioning accuracy of the CNC Wood Router is good and bad, and the machine tool does not alarm: possible reason: the mechanical transmission chain is not well connected. Such as loose coupling, etc.
The load of the machine tool is too heavy: overcurrent alarms often occur, and the motor heats up abnormally. Possible cause: poor mechanical assembly, resulting in heavy mechanical load. For newly designed machine tools, this phenomenon will also occur if the servo motor is selected too small. In addition, this alarm will also be issued if the servo parameter setting of the CNC Wood Router is wrong.

For the auxiliary actions of the machine tool, such as the action of the tool changer, the output signal to control the action already exists, but the action does not. Possible reasons: mechanical jamming, pipe blockage, etc. Note: When the CNC Wood Router breaks down, it is often that the electromechanical is intertwined.
The orientation position of the machine tool spindle is inaccurate, but the machine tool does not alarm. Possible reasons: Due to the current CNC Wood Router tools, the encoder orientation is generally used for the orientation of the spindle, and the spindle and the spindle motor are connected by 1: 1, and the encoder built into the motor is directly used for orientation. Therefore, if this happens, there must be a problem with the mechanical connection part!