The CNC cutting machine is a special machine specially used for panel furniture processing and manufacturing, and it also greatly saves labor, reduces the dependence on labor, and solves a lot of waste of plates. Therefore, it is very important to choose a CNC cutting machine with stable performance and mature technology. So for woodworking cutting machine, should we choose automatic loading and unloading or double station?

Double station: There are two work surfaces. After the machine finishes processing the No. 1 table, the gantry of the machine will go to the No. 2 table for further processing. The worker picks up the board on the No. 1 table, and then loads the whole board, and the machine finishes processing No. 2. After the countertop shift, go directly to the No. 1 countertop for processing. This cycle of processing increases the processing output of the machine and makes full use of workers.

Automatic loading and unloading: The machine has added equipment with automatic loading and unloading functions. After the machine finishes processing the upper plate of the work surface, the machine goes to the loading platform to grab the plate, and then pushes the plate on the table to the top of the plate after grasping the plate. The unloading platform enables uninterrupted processing, and the entire processing process does not require manual feeding, which reduces the amount of manual labor.

Both have their own advantages: the advantage of the double station is that it saves the loading time, and the advantage of automatic loading and unloading is that it saves the manual lifting of the board and the cost of a worker. If you want to process a few more boards a day and increase the processing efficiency, choose a double station. If you want to save labor, choose automatic loading and unloading. The editor of Blue Elephant CNC recommends that you purchase equipment suitable for your own manufacturer according to your actual needs when purchasing equipment.