Some customers will encounter edge collapse when using CNC Router to process boards in the production process of board furniture. What is the reason for this problem? Let me briefly understand the causes of this problem from five aspects.
1. Board material: The two types of boards used in the production of board furniture are density board and particle board. These two types of boards have the advantages of low cost and easy processing, but its disadvantage is that the board is pressed. If the bonding strength is not strong, it is easy to collapse during the processing. Solution: If you do not change the board, it is recommended that you choose a board CNC Router. The board furniture production line CNC Router produced by Jinan Blue Elephant solves the problem of edge collapse during processing.

2. Spindle speed: Due to the high hardness and compression characteristics of the board, if the spindle speed is not enough, it is easy to cause edge collapse;
3. Tool sharpness: The sharpness of the tool directly affects the roughness of the cutting surface. If the tool is not sharp enough, the cut board will have edge collapse, so it is recommended that you use good tools and replace worn tools in time during the production process;
4. The tool clamping is not firm;
5. Countertop: Some manufacturers configure countertops that are not vacuum adsorption countertops, or the vacuum adsorption countertops have weak adsorption capacity, causing the board to shift, which is also the reason for the edge collapse of the board; now vacuum adsorption countertops are used on panel furniture production lines. Jinan Blue Elephant uses double-layer vacuum adsorption countertops, which do not need to be clamped. The vacuum suction directly adsorbs the board on the countertop through the fine adsorption holes on the countertop. This adsorption countertop has a good adsorption effect, and the board will be evenly stressed, which directly improves the cutting accuracy. Moreover, the panel CNC Router can adjust the spindle speed and cutting speed of the equipment according to the data required for cutting. It is simple to use and has high processing efficiency. For panel furniture, you can also choose two workbenches with double processes to operate separately, saving loading and unloading time and improving production efficiency.