In life, the finished products of CNC Router are very common. This equipment is mainly used for plate processing equipment, which can save a lot of labor, and the price of CNC Router is reasonable. In order to use this product better, you need to master some relevant information about the product, so Blue Elephant has sorted out some small knowledge about this device for you.
1. Theoretical basis: The training work must start from the theoretical training work, and then proceed to the next step of training after mastering the theory;
2. The problem of the use of cutting tools of CNC Wood Router: after the theoretical training, the training of cutting tools is carried out. Operators can clearly understand common tools, engraving motor speed, travel speed, precautions, etc.;

3. The scope of application of the plate: the operator understands the application scope of various materials, and is familiar with different materials, different thicknesses, and different finished product sizes. Familiar with different engraving methods of different materials is conducive to better operation.
4. The operation of various software of CNC Wood Router , the software training is mainly concentrated in the field of user application; the software requirements are: various types of software, various operations, generation of paths, and the ability to quickly find out path errors Wait.
Daily maintenance after use: After each use of the machine, pay attention to cleaning, be sure to clean the dust on the platform and transmission system, and lubricate the transmission system (X, Y, Z three-axis) regularly (weekly). (Note: X, Y, and Z three-axis polished rods are maintained with engine oil; high-speed butter is added to the screw rod; if the temperature of the fully automatic computer engraving machine in the working environment is too low in winter, the screw rod and polished rod (square guide rail or circular guide rail) Rinse and clean with gasoline, and then add engine oil, otherwise it will cause excessive resistance in the transmission part of the machine and cause machine misalignment.) When performing maintenance and inspection of electrical appliances, be sure to cut off the power supply, and wait until the monitor has no display and the main circuit power indicator light goes out , Computer woodworking engraving machine can be carried out.