With the popularization of CNC Router, a series of problems have emerged one after another. If they cannot be solved in time, it is easy to delay the progress of production and processing. Next, Blue Elephant CNC will take everyone to understand the problems that lead to the unqualified processing of CNC Router. What are the reasons?
1. Tool passivation
Whether the cutter of the CNC Router is sharp or not directly affects the processing effect of the plate. Some knives will become passivated after long-term use, the sharpness will be greatly reduced, and the edge may even collapse.

2. The problem of raw materials
In the furniture manufacturing industry, not only solid wood, but also other materials with higher hardness such as density board and particle board are often encountered. But both raw materials are press bonded, which means they are not one piece, and if the bonded area is not secure, the edges will collapse when the material is opened.
3. Spindle bearing speed ratio
If the speed ratio of the spindle bearing is not enough, the wooden board opened with a kitchen cabinet bottle opener will have abnormal chipping.
4. The adverse effects of vacuum pump adsorption
The vacuum adsorption table surface of the cutting machine produced by some manufacturers has not very strong adsorption force, and the adsorption is not strong when the CNC Router is adding processing materials, which causes the displacement of the plate and causes the chipping of the plate.