When the manufacturer uses the CNC Router, there will be a lot of sawdust coming out of the processing material. Although the machine is easy to use automatically, it still needs to do maintenance work at the same time. Only in this way can it be used for a longer time and also for the purpose of To avoid failures, cleaning and pre-use inspections are also required. Specifically, the maintenance points of the CNC Router include the following aspects, and these specifications should be carefully followed.
What are the maintenance points of the CNC Router
1. Regular inspection and maintenance work and daily cleaning should be done well.
Because the CNC Router is operated every day, it is inevitable that the parts will become loose or some other parts will appear after a period of use. Therefore, the machinery and equipment need to be checked regularly. The CNC Router company introduced that the loose parts should be returned to their positions, and the worn bearings should be replaced in time. And the CNC Router company also reminds to do dust removal and cleaning after the end of the work every day, and do not let dust enter the machine.

2. Lubrication and maintenance should be done in time and standardized operation
The company introduced that because the machine mainly runs on bearings and gears, these key parts must be lubricated to achieve smooth operation and maintain production. Progress will not be affected. The CNC Router company emphasizes that the lubrication work should be done well, and it should be checked at regular intervals, and it should be handled according to the requirements of the manual.
3. Carry it by air and pay attention to the safety of the operator.
The company recommends that when you open the machine every day, let it run dry for a while to ensure that the machine is correct, and then you can enter the next step after smooth operation. And when the CNC Router is running, the operator should pay attention to his own personal safety, operate in strict accordance with the specifications and be cautious to avoid accidents.
The above are several aspects included in the maintenance points of the furniture cutting machine in this city. In addition, the machine equipment should be grounded, which can prevent electrostatic interference. Knowing which company has a good reputation for the cabinet cutting machine also reminds that if the operator does not have a ground wire, it will easily affect the transmission of the control signal. Only by doing this well can errors be avoided, as well as the setting of machine parameters. You should also pay more attention.