CNC Router occupies an important position in panel furniture production enterprises. Many manufacturers or professional decoration personnel are using it. And the improved quality and precision of furniture Router production means less inventory and easier lean manufacturing. Therefore, establishing a standard process operation and quality inspection for CNC Router is the most important task. So do you know what the inspection standard of the Router is? How much do you know about it?
 
The quality inspection requirements of the Router are as follows:
 
1. Electrical contact
 
(1) The equipment is connected to the air source, the pressure adjustment is not less than 0.65MPa, and the sea and air problems are checked.
 
(2) Connect the power cable to the chassis (pay attention to the N-phase cable), and power it on item by item.
 
2. Test the functional status and signal of each part of the motor
 
(1) Test the spindle rotation, cooling fan, and the signal of loosening the clamp is normal.
 
(2) Check that the chassis fan rotates normally and the air supply direction is correct.
 
(3) The two signals of the test tool setting instrument are normal, and the safety height of the tool setting is reasonable.
 
(4) The handle does not turn when the handle is pushed into the jaws, and the handle does not swing when changing the tool.
 
(5) Check the correctness of the vacuum pump on-off and overheat protection signals on the system.
 
(6) The operating system checks that the vacuum adsorption and destruction actions are effective.
 
(7) There is no interference in the vacuuming movement.
 
(8) There is no interference between the push rod and the tool magazine and the feeding roller plate.

 
3. Parameters of each motor
 
(1) Check the running status of each axis and adjust the origin parameters.
 
4. Detect the precision of precision devices
 
(1) Modify the parameters of the driver and inverter.
 
(2) Test the action of all cylinders, adjust the warm flush, and lock the speed valve.
 
(3) The test tool magazine pushes out and retracts smoothly.
 
(4) When loosening the tool, the spindle blows air (0.2a) normally.
 
(5) When adjusting the tool magazine extension, the left and right accuracy of the meter is less than 0.2mm.
 
(6) Check the tightness of the engagement of the rack (the amount of sway is 0.1mm, and the gap is 0.05mm).
 
(7) Detect the distortion of the beam, and the test is not greater than 0.15.
 
(8) All cylinders used in pairs are adjusted so that their movements are consistent and synchronized.
 
(9) Spindle vertical error.
 
(10) XY axis diagonal <0.05mm/500mm.
 
(11) The straightness of all positioning cylinders is 0.1mm/2000mm (adjustment and acceptance by finishing personnel).
 
(12) The height of the top of the vertebral block added by the back-push cylinder is not more than 30mm from the lining plate.
 
(13) Equipment proofing test and pick angle.
 
5. Motor oil quantity and usage
 
(1) The oil pump is not less than half of the volume, set the time and test the oil circuit.
 
The above CNC Router manufacturers introduce the inspection standards for the quality of Routers. When selecting, it is necessary to ensure the machining accuracy of the selected equipment, to ensure that the selected equipment is of reliable quality and can be used normally. If you want to know more about Router processing skills, please pay more attention to the updates of our website!