As one of the high-tech mechanical equipment, CNC wood router equipment, with its powerful cutting and punching processing performance, has won the vast market through excellent processing effect, and its popularity has become more and more widely. However, as processing machinery and equipment, its tools are large consumables, and as a custom furniture manufacturer, how to effectively reduce production costs is very critical. Therefore, when the customer uses the CNC wood router, how to better grasp and grasp the wear of the tool, and replace the tool according to the specific wear, which can better save costs. When the tool is used for drilling, cutting, etc., the rake face and flank face of the tool are often in contact with the workpiece, resulting in severe friction. At the same time, there is a relatively high temperature and pressure in the contact surface area. Wear occurs.

1. When the rake face wears and cuts plastic materials, the chips and the rake face are in contact with each other, mainly to form crater wear.
2. When the flank face wears and cuts brittle materials, the contact length between the chip and the rake face is short, and the relative bluntness of the blade makes the flank face wear larger.
3. When cutting steel by boundary wear, deep grooves are often ground on the flank where the main cutting edge is close to the outer skin of the workpiece and the secondary cutting edge is close to the tool tip.
According to the wear conditions of the tools when the CNC wood router processes different plates, customers can choose suitable tools according to the processing technology, carry out the rotation of the tools, or repair the worn tools. because