Some problems of CNC Router are caused by lack of maintenance at ordinary times, so, next, we will introduce the maintenance rules of CNC Router, so that our customers can use the equipment better, Router with its precision and The speed improves the production efficiency, but what should be paid attention to in the maintenance of the CNC Router? In order to maintain the good condition of each part of the Router, it is necessary to maintain the Router frequently, which can not only eliminate many hidden dangers, but also prevent the occurrence of malignant accidents and realize safe production.
The content and requirements of daily maintenance of different types of CNC Routers are not exactly the same, but generally include the following aspects:
1. The CNC Router should be placed in a dry and ventilated place (to prevent exposure to the sun);
2. CNC The Router should be equipped with a reliable voltage regulator to ensure that the ground wire is safely grounded;
3. Try not to use the Internet computer to output files to the CNC Router;
4. The CNC Router should be maintained every other month (on the lead screw Add appropriate amount of lubricating oil);
5. The control box should be placed in a well-ventilated place, not in a high temperature area;
6. Within a certain period of time, check whether the circuit of the CNC Router is loose;
7. Do not put sundries (including magnetic materials) , overweight items, liquid) on the table or head of the CNC Router;
8. Do not let the machine work in the same corner of the CNC Router table for a long time (in case the screw and the guide rail do not contact the beam for a long time) , can not be lubricated normally);
9. Maintain a good lubrication state, regularly check and clean the screw, add or replace grease, so that all moving parts such as screw and nut are always in a good lubrication state to reduce the wear rate of the machine.

If the maintenance computer and control box of the CNC Router are too dirty and dusty, it will affect the normal operation of the machine. If the control box is too dirty, it may cause a short circuit and burn out the drive. Regular cleaning is required to keep the motherboard and various cards ventilated and dry.
Maintenance of the spindle In order to use the spindle motor for a longer and more stable period, the following points should be paid attention to:
1. Change the water every three days.
2. Refuel regularly.
3. Keep the bearings lubricated.
4. No water can enter the motor.
5. Keep the bearings clean.
6. Do not work for a long time at high speed and strong resistance.
The maintenance of the CNC Router needs to be done persistently, rather than perfunctory cleaning, otherwise the quality of the equipment itself will be problematic.